Two-Stage Cooling: The Benefits

Two-Stage Cooling: The BenefitsBecause single-stage cooling is more than you need most of the time, two-stage cooling offers better comfort control and lower operating costs. A one-stage air conditioner has only a single cooling output: 100 percent all the time, as long as the unit is running. This all or nothing approach has several drawbacks:

  • Once the house is cooled to the desired thermostat setting, the single-stage A/C continues to operate at 100 percent output, causing the unit to cycle on and off frequently and inducing noticeable temperature swings above and below the desired thermostat setting.
  • Single-stage cooling consumes more electricity, particularly on days where temperatures are more moderate and 100 percent cooling output isn’t required.
  • Because the single-stage unit cycles on and off very frequently throughout the day, it incurs wear and tear faster and may have shorter expected service life.
  • Shorter “on” cycles don’t allow enough time for humidity extraction at the evaporator coil to reach optimum levels. A more humid indoor environment feels warmer and less comfortable.

A two-stage A/C incorporates a compressor that operates in two outputs: 100 percent and approximately 67 percent. When the thermostat calls for quick cooling of an overly warm house, the compressor runs at 100 percent output. Once the thermostat setting has been reached, the system automatically defaults to the lower 67 percent output mode.

Here are some reasons why two stages are better than one:

  • When the system downshifts to the lower output mode, it runs more continuously and maintains more accurate temperature control. This fine-tunes indoor comfort, typically keeping the temperature within one or two degrees of the desired setting and eliminating extreme swings.
  • Running at 67 percent output, the compressor consumes about one-third less electricity so cooling costs are reduced.
  • Because the system runs more continuously, the humidity extraction function — an important component of the cooling process — works more efficiently.
  • Frequent on/off cycling is reduced so wear and tear on critical A/C components is minimized and extended service life is more likely.

In the northern San Diego region, ask the professionals at Sherlock Heating & Air Conditioning for more about upgrading to two-stage cooling.

Our goal is to help educate our customers in the greater San Diego and San Marcos, California area about energy and home comfort issues (specific to HVAC systems).

Credit/Copyright Attribution: “geralt/pixabay”

Related Posts

3 Comments

  • Two stage of cooling is always better then single stage for AC.

    Reply
  • So, what you are saying is that a two stage cooling system is better for your home because it keeps the environment more stable, and because of that, temperature swings are reduced and the cost goes down? I had actually never heard of a two stage cooling process before reading this article. If I’m not wrong, my unit is just a single stage, but I will have to check again. Maybe I will look at a two stage system sometime in the future.

    Reply
  • I am interested to learn more about two stage cooling. It is good to know that with this method, frequent on/off cycling is reduced which decreases the amount of wear and tear on the system. Something to consider would be to hire a professional to perform inspections and repairs when needed to ensure that the air conditioner remain in functioning condition for as long as possible.

    Reply

Write a comment